Raw Water Pump→Raw Water Pumps by Jabsco

Part # & Price Description
JAB10970
$799.00
Raw Water Pump, Perkins 2488322, Jabsco 10970
Sea Water Pump Replaces Perkins #2488322Jabsco
 
JAB1673-1001
$501.95
Raw Water Pump, Kohler 15 HP, New Style, 1673-1001, Jabsco 1673-1001
Sea Water Pump (new style) fits 15 Hp Kohler engines
Has 1/2" ports
1673-1001Jabsco
 
JAB18330-0000
$1,199.60
Pump 2 Inch Electric Clutch Jabsco 18330-0000
This Manually Activated Clutch Pump Offers all the Benefits of Flexible Impeller Pumps with a High Capacity Flow Rate and Horizontally Oriented Ports.
4710 gph @ 10' total head @1750 rpm
Self-Priming to 15' vertical lift
Mechanical face type shaft seal
Nitrile Impeller
Two single-row shaft ball bearings
Fitting: 2" Internal NPT
Size: 12-7/16" L x 5-15/16" W x 5-3/4" H
Pulley Dia: 7"
Weight: 24 lb
12 Volt DC Pump with double A groove pulley
 
JAB18400-0050
$774.95
Raw Water Pump, Onan 132-0147, Jabsco 18400-0050
Sea Water Pump Replaces Onan #132-0147Jabsco
 
JAB3270-0001
$674.95
Raw Water Pump, Perkins 35615, Jabsco 3270-0001
Sea Water Pump Replaces Perkins #35615Jabsco
 
JOH10-24232-1
$229.95
Water Pump Raw Crank Mount Volvo GM Indmar Ford V8 Johnson Pump 10-24232-1

Crankshaft mounted raw water pump.
Pump has a 1-1/4" Hose Outlet

This pump is most commonly used on Volvo Penta from 1979-1993, Marine Power, Indmar and Crusader brand engines where Raw Water Pump is mounted to the Harmonic Balancer.

Complete pump ready to install.
dimensions for crank mounted pump
Uses JOH09-812 Impeller Kit.
Replaces: Indmar original equipment part #s: 685001, 685001-1; Crusader PCM original equipment part # RA057024; Sierra # 18-3587
Marine Power and Indmar also used this pump on their marine engines as well. This pump is great for conversion because it requires no belt.

Notice concerning these crank mounted raw water pumps.

We have had several bad online reviews concerning this pump.  People claim they have a “CERTIFIED MARINE MECHANIC” install the pump and the flange must have been “defective” because it broke upon installation.

The bolts on this pump will line up correctly in two wrong positions!  

The pulley has two knobs or protrusions that center the pump on the pulley itself.  If the knobs are not correctly oriented the pump it will cock and most people think you can just pull it in with the bolts.  This does not work breaks the flange.

We keep our prices low due to high volume and our large purchasing power.  We are technically oriented and know how these parts work. The way we keep our prices low is by taking care of our mistakes, but not taking care of other customer screw ups.  If that gets us bad online reviews by people who cannot take responsibility for their mistakes then so-be-it.
THIS IS BREAKAGE NOT COVERED UNDER WARRANTY!
evidence on incorrect installation
protrusion on back side of pulley
damage due to incorrect pulley installation

 

 

 
 
JAB6400-1051
$814.95
Raw Water Pump, Caterpillar 3208, 7W8020 Jabsco 6400-1051
Sea Water Pump fits Caterpillar 3208 Series engines. Note the inlet and outlet are across fron each other and threaded.
Replaces CAT #1W9046, 4L9070, 4L1919Jabsco
 
JAB7420-0004
$949.95
Raw Water Pump, Northern Lights 25-14801, Jabsco 7420-0004
Sea Water Pump Replaces Northern Lights #25-14801Jabsco
 
JAB7420-1001
$949.95
Raw Water Pump, Caterpillar 3208, 1W9046, 4L9070, 4L1919, Jabsco 7420-1001
Sea Water Pump fits Caterpillar 3208 Series engines. Note the inlet and outlet are threaded.
Replaces CAT #7W8019Jabsco
 
JAB777-9001
$547.95
Raw Water Pump, Jabsco 1 Inch Foot Mount
Jabsco Pedestal pump for engine cooling, washdown, circulation and other general purposes. Corrosion resistant bronze. Stainless steel shaft. Permanently lubricated ball bearings. Engine Cooling with neoprene impeller, full cam and lip seal.
Ports: 1" NPT Internal
26 gpm (98 lpm) at 10ft (3m) total head at 1750 rpm.
Self-priming to 10ft (3m) vertical lift.
Lip seal or mechanical face seal.
Double-row ball bearing.
Takes Jabsco impeller # 179370001
Fits many applications.Jabsco
 

ebasicpower.com is © 1999- Basic Power Industries, Inc., all rights reserved • All Item specifications and availability are subject to change without notice
Basic Power Industries, Inc.• 177 Fulford Dr, Harkers Island, NC 28531-9520, US • +1-252-504-3355



Call us (252)728-5566